Determiningthe resistance of glazing material to impact by the penetration method.
Principle:
Thespecimen is supported vertically in a steel frame and an impact shot bag isreleased from a pre-determined height to strike the specimen at the centre. Theheight is progressively increased until fracture occurs.
Related Standards:
AS/NZS2208 Safety glazing materials in buildings â Appendix D: Impact Test
GB15763.3 Safety glazing materials in building Part 3: Laminated glass â AppendixC: Test device for the impact performance of shot bag
ANSIZ97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specificationsand Methods of Test - Clause 5.1: Impact Test
Apparatus:
1) Impact testingframe:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
2)Impact shot bag:
Weight: 45kg±0.1kg 46kg±0.1kg
Height: 330mm ± 13mm
Max diameter: 250mm
Leather thickness: 1.5mm
Lead sand size: 2.5mm
Customized: 25kg /48kg
![]() |
QINHUANGDAO YUANCHEN HARDWARE CO.,LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd.(Terms of Use) Developed and Managed by Infocom Network Ltd. |